Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen

Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen. We are a factory specializing in high-quality gas mass flow meters. Contact us today!
Request a Quote

PRODUCTS DETAILS

Basic Info.

Model NO.
KTGMFM-20
Application
Industrial Production
Type
Coriolis Mass Flow Meter
Measuring Media
Gas
Measuring Principle
Thermodynamic
Measurement Object
Closed Pipeline
Certification
CE, ISO, SGS
Output Type
Pluse, 4-20mA, RS485and GPRS, Hart
Power Supply Type
24VDC or 220VAC
Transport Package
Wooden Box Package or Carton Packing
Specification
67.5*27.5*29CM
Trademark
kunkeandao
Origin
Weihai
HS Code
9026100000
Production Capacity
3000 Pieces/Year

Product Description

WEIHAI Manufacturer  Thermal Gas Mass Flow meter for Nitrogen,oxygen
Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen
 
Product Features :
1.Real mass flow meter, no need for temperature and pressure compensation for gas flow measurement, convenient and accurate measurement.

2.Wide range ratio:1:1000,flow rate as high as 120Nm/s and as low as 0.1Nm/s.

3.Easy to install and maintain. Non-stop production installation and maintenance can be achieved where field conditions permit. (requires special customization)


4.Insensitive to small particles such as dust, suitable for all kinds of single or mixed gas measurement .
 
Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen

Technical Parameter:
Fluid gas without water molecules (except acetylene)
Velocity range 0~60m/s
Accuracy Reading±1%,full range±0.5%
Repeatability full range0.2%
Temperature Environmental conditions:-20ºC~70ºC;Medium temperature:-20ºC~120ºC or -20ºC~350ºC
Power 24VDC/220VAC
Output 4~20mA,pulse
Response time ≤1s
temperature coefficient 0.05%/ºC
Communication interface serial port output RS485,HART
Screen content quantity of heat,flow for short period;total flow
Pressure ≤4.2MPa
connection locking device/ball valve, flanged joint,Flange mounting
Explosion proof grade Exd II CT4
Ingress protection Sensor IP67;transmitter IP65
Alarm point Relay dry contact output, can choose the upper limit single alarm or lower limit double alarm
Sensor diameter 3mm/4mm/5mm
Probe diameter 18mm
Sensor texture 1Cr18Ni9Ti;304L;hastelloy C;Ta
Probe texture 1Cr18Ni9Ti;304L;hastelloy C;Ta
Shell texture Dangerous areas to install shell for powder coated aluminum castings
Electrical interface M20X1.5
Pressure loss Pipe diameter greater than DN80 can be ignored

Connaction type:

Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen
Field application
 
Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen
Company information
     WEIHAI KUNKE FLOW INSTRUMENT CO.,LTD.  is a high-tech enterprise specializing in meter research and development, production, sales and service.
    The company was founded in 2010. In 2012, it won the excellent incubation enterprise of Weihai City. It is a high-tech enterprise supported by the Weihai Municipal Government. In 2017, the company was listed as a securities company.
   The company has successively obtained
ISO9001-2015 international quality system certification, ISO14001-2015 environmental management system certification, OHSAS18001-2007 occupational health and safety management system certification and ISO10012-2003 measurement management system certification, CE certificate,
Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen

Exhibition information
Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen
Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen
Payment&Delivery
Weihai Manufacturer Thermal Gas Mass Flow Meter for Nitrogen, Oxygen
 FAQ:

Q: How long will you give me the reply? 
A: we will contact you in 1 hours as soon as we can.
 
Q:Could I visit your factory?
A: Sincerely invite you to visit our factory.
 
Q: Do you provide samples ? 
A: Yes,we have materials in stock to help you to get the samples as soon as we can.
 
Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you

Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU ,Credit Assurance

Q: What is the warranty for your product ?
A: Warranty: 1 years, Lifetime maintenance

Q: Can you make the products according to my own drawings?
A:Yes, we can do OEM service based on your requirement if it is executable.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours